The new ergonomically designed device has the same parameters as its predecessor; adjustable pulse rate and pulse width, and has three modes of operation; constant, width modulation, and burst. This TENS unit with timer is perfect for those seeking timed sessions. The new design of the device incorporates a sliding amplitude control cover for safety, and a permanently attached 9 volt battery cover to prevent loss. The 9 volt battery compartment has been redesigned for simple insertion and removal of the battery. To provide comfort while wearing, the belt clip has been positioned horizontally. The device was designed to be easy to use and economically priced for the patient.
Each package contains:
2 Channels waveform | Assymetrical, biphasic square-wave |
Output | Constant current |
Intensity | 0 - 100 mA peak |
Pulse rate | Adjustable 2 - 150 Hz |
Pulse width | Adjustable 50 - 250 msec |
Mode switch | Burst, continuous & modulation |
Continuous | Continuous stimulation |
Burst | 8 pulses per burst / 2 burst per second |
Modulation | Decrease / increase of set width 50% over a five-second period. |
Dimensions | 3.8" x 2.60" x 1" (97 mm x 62 mm x 25 mm) |
Weight | 3.1 oz (87 g) |
Power source | 9V Battery, E-block, type 6F22 |
Timer | Continuous, 15, 30 or 60 minutes |
Number of electrodes/Leadwires | 4 |
Tolerance | +/- 10% |
190 St-Elzear West Blvd., Laval (Québec) H7L 3N3 | T: 450 669-8985 • 1 800 361-0877 | F: 450 669-9532 • 1 888 935-7001 | info@mtm.ca
© 2019 MTM - Médical Tronik. All rights reserved.